For people working in high elevations, properly functioning fall protection equipment could be the difference between going home after a long day or not going home at all due to an accident. The worthiness of the gear you use must be up to Occupational Safety and Health Administration (OSHA) standards. If you compromise on your equipment, then you may be risking the lives of your employees.
Here are some things you must consider when inspecting your equipment.
The initial inspection should be done when the new equipment arrives. Check the item thoroughly to ensure there are no visible damages in the kit, such as tears in the material or defects in the sewing or stitching patterns. A part of this process would be to ensure that the fall protection equipment is the right size for the individual using it. When it comes to safety, loose or too-tight equipment may have detrimental effects.
Aside from the initial inspection, you should also train your employees to check their assigned equipment every day before using them. This is to ensure that there are no visible wear and tear and to guarantee that the equipment is still usable and in perfect condition.
Things to watch out for
During inspection, the damages you should look out for depends on the type of equipment. For fall protection harnesses, you must look for broken stitching due to burns or being pulled. Check all the hardware attachment points, webbing, buckles, and D-rings.
Meanwhile, some fall protection equipment, such as self-retracting lifelines, require some tinkering, as many of its components are hidden inside the housing. An excellent initial inspection would be to look for any damage to the housing, lifeline, and connectors.
Of course, before anything else, you must buy high-quality equipment. For any inquiries, visit us today at KC Supply Co.